Philips SDV2750/27 manual Using your indoor television antenna, For VHF/FM reception

4Using your indoor television antenna

4.1Adjusting Low-High amplifier level 1 Turn the amplifier “ON/OFF” switch on

the antenna to the “ON” position. 4

2 Set the Low-High amplifier level switch according to your location. 5

For locations that are relatively close to local TV transmitters (less than 10-15 miles) set the switch to the ”L” position.

For locations that are further away from local TV broadcast transmitters (more than 15 miles) set the switch to the “H” position.

4.1 For VHF/FM reception

1Extend the telescoping dipoles to the longest possible length. 6

2Turn your TV or FM radio to the desired channel/station. Adjust the dipoles by moving in different directions up and down, until reception is achieved. 7

3Turn on the amplifier by rotating the VHF gain control knob towards the max position until reception is improved. 8

DNote

If you are unsure of the distance from the local TV broadcast transmitters to your location, visit www.antennaweb.org where you can enter your address and obtain local map that will provide this information.

DNote

Depending on your location and surroundings, you may obtain the best possible reception with the amplifiers turned to the minimum level.

4

ENGLISH

5

6

7

8

2750_27.indb 5

5/7/08 10:32:46 AM