Philips SDV4400/27 manual Wall mounting your antenna, Warranty & Service

5Use a wall-through tube to neatly route the coaxial cable through the walls.

6Use only the length of cable that your installation requires. Do not coil extra cable behind the receiver. Cut the correct length.

4 Wall mounting your antenna

1Attach mounting clamps behind wall brackets, and thru reinforcing plates, with bolts facing out. Do not tighten. 7

2Secure the assembled wall mount to wall with lag screws, making sure brackets are approximately 2 ft. apart and vertically aligned.

3Insert mast (not included) and assembled antenna through both mounts, checking to see that the mast is aligned vertically (straight).Tighten hex-nuts securely.

4To prevent the mast from turning, drill a 13/64" hole in mast through the pilot hole of one of the mounting clamps. Insert 3/4" self-tapping screw and tighten.

7

Mounting clamps Wall brackets Reinforcing plates

Hex nuts

2" lag screws

Pilot Hole

3/4" tap screw

5 Warranty & Service

Limited One-Year Warranty

Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your purchase of this product. This warranty extends only to the original purchaser of the product, and is not transferable. To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. For customer support or to obtain warranty service, please call 919-573-7854.THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Philips’ liability is limited to repair or, at its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted by law.This warranty gives you specific legal rights.You may also have other rights that vary from state to state.

For technical support, send us an email with the model number of the product and a detailed description of your problem to: accessorysupport@philips.com

ENGLISH