4 Use the headset
Connect the headset to your mobile phone
1 With the mobile phone turned on, press
until the LED lights up, to turn on the headset.
»» Once turned on, the headset reconnects automatically to the last device it was connected to.
»» If the last connected device is not available, the headset tries to reconnect to the second to last device that was connected to the headset. If it cannot find this device, it will look for all previously paired devices in the order of last usage, until it finds a device to connect to.The headset stores up to three previously paired devices.
Tip
•• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu of your mobile phone.
Automatic power saving
If the headset cannot find any Bluetooth device to connect to in range within five minutes, it automatically powers down to save battery life.
Get the best fit
1 Choose the earbuds that best fit for your ear canal. 2 Gently blend the ear hook to fit into your ears.
3 Adjust the rubber part of the ear hook to the height that you feel fit.
4 Twist the earbuds to the right position for best fit and noise isolation.
Operate the headset
Enter pairing mode Ensure the headset is off. Press 
until LED starts blinking red/blue alternately.
Check battery | When first use: Hold for 2 seconds. |
| During operation: Hold VOL + and VOL |
-simultaneously. >50%: 1 blue flash >25%: 2 red flash <25%: 3 red flash
Turn headset on/off | Hold until LED turns on/off. | |||||
Play/Pause music | Tap |
|
|
| ||
Stop music | Hold |
|
|
| ||
Next / Previous track | Tap |
|
| / |
|
|
|
| |||||
|
|
|
|
|
|
|
Adjust volume | Press VOL +/VOL - | |||||
Pick up / End a call | Tap |
|
|
| ||
Reject a call | Hold |
|
|
| ||
Redial the last number | Press |
| twice quickly. | |||
Activate voice dialing* | Hold |
| until beep occurs. | |||
Mute/Unmute the Mic | Double tap during a call. | |||||
Transfer a call to a | Hold |
|
| during a call. | ||
|
| |||||
mobile phone |
|
|
|
|
|
|
* Available if supported by your mobile phone.
Manage 3-way calls
If your mobile phone and network operator support
can manage
To hold the active call and | Press | while the 2nd call is |
accept a waiting call | coming in. | |
To drop the active call and | Hold | while the 2nd call is |
accept a waiting call | coming in. | |
To swap a call | Press | during a call. |
LED and sound indication
The red/blue LED flashes alternately. | The headset is ready for |
| pairing. |
The blue LED flashes once every 6 | The headset is connected |
seconds. | to the device. |
The blue LED flashes twice every 3 | The headset is not |
seconds. | connected. |
The blue LED flashes once every half | There is an incoming/ |
a second. | outgoing call. |
The blue LED flashes once every | The headset is active on |
second. | a call. |
The red LED flashes three times and | The battery is low in |
beeps twice every minute. | power. |
Solid red LED. | The headset is charging. |
The LED is off. | The headset is off./Charging |
| is finished. |
The headset beeps every 5 seconds. | The Mic is muted. |
Clean the headset
A few ways to clean the headset:
•Wipe with clean cloth.
•Wash it under running tape water.
Caution
•• Do not dive with this product or immerse it into water.
English
EN 7
