The table below shows how to operate your headset:
In order to: | Do this: |
| Sound and LED indicator |
| |
|
|
|
| feedback |
|
Enter pairing mode | Press | until the LED starts | Alternating red / blue flash |
| |
| blinking red / blue alternately |
|
| ||
Turn headset on | Press | for 2 seconds | • 3x red flash: battery is low. |
| |
|
|
|
| • 2x red flash: > 25% of |
|
|
|
|
| charge remaining. |
|
|
|
|
| • 1x blue flash: > 50% of |
|
|
|
|
| charge remaining. |
|
Turn headset off | Hold | for min. 4 sec | One long beep |
| |
Play / Pause music | Tap |
|
|
|
|
Stop music | Tap | and | simultaneously |
|
|
Skip Fwd / Bwd | Tap | or |
|
|
|
FullSound on / off | Hold | and | simultaneously | One short beep: On |
|
| for 4 sec. |
| Two short beeps: Off |
| |
Adjust volume | Tap VOL- or VOL+ |
|
| ||
Pick up a call / End a call | Tap |
|
|
|
|
Reject a call | Hold |
|
| One long beep |
|
Redial the last number | Double tap |
| Two short beeps |
| |
Activate voice dialing* | Hold | until “beep” sound | One short beep |
| |
Mute Mic | Double tap | (during call) | Short beep every five |
| |
|
|
|
| seconds until mute is turned |
|
|
|
|
| off. |
|
Transfer call to phone* | Hold |
|
| One short beep |
|
Other status indicators: |
|
|
|
|
|
Connected to Bluetooth device | Blue light flashes every 3 seconds. |
|
| ||
(while in standby or while |
|
|
|
|
|
listening to music) |
|
|
|
|
|
Ready for pairing | In pairing mode, LED light flashes continuously alternating red |
| |||
| and blue. |
|
|
| |
On but not connected | Blue light flashing fast. |
|
| ||
In call | While call is ringing, blue light flashes fast (twice per second). |
| |||
| After call pick up, slows down to once per second. |
| |||
Low battery | LED will flash red instead of blue. A short double beep will |
| |||
| be heard every minute with five minutes or less of talk time |
| |||
| remaining. |
|
|
|
* Available if supported by your mobile phone
14