Philips SHC8565/00 manual Your hearing

		ENGLISH 9
	No battery installed	Follow step 1 to 4 of
		‘Installing/replacing the batteries’
	Wrong battery orientation	Reposition the batteries according to
		the engraved polarity symbol.
	No power supply to transmitter	Make sure the docking station is
		connected to the local mains power
		supply through an adapter and follow
		step 5 to 7.
	Battery power running low	Follow steps 5 to 7 to recharge the
		system.
	Audio source not connected	Make sure the audio output of your
		audio source is connected to the
		3.5 mm STEREO INPUT JACK of
		your transmitter. Follow step 9 to 12.
	Audio source is off	Turn on your audio source.
Volume level set too low		Adjust the volume level of your
		audio source or the headphone.
		Hearing Safety: Continuous use at a
		high volume may permanently damage
		your hearing.
	Audio output level low	In case of audio sources with
		adjustable output level, adjust the
		output level to a higher and
		non-distorted level. IMPORTANT:
		In case of certain TVs, the headphone
		jack output level can only be adjusted
		after accessing the TV on-screen menu.
	Headphone not tuned to	Push and hold the AUTO-TUNING
the transmitter		BUTTON for about 1 sec, then the
		headphone will automatically search
		for the best possible reception.
	Interference from other	1) Alter the transmitter’s frequency
radio sources		channel. Select 1 of the 3 options for
		best reception. We advise you to
		select channel 1 as the first option.
		Next adjust the headphone’s tuning
		channel as described above.
		2) Move transmitter or headphone
		elsewhere
	Receiver too far away from	Move closer for reception
transmitter
Transmitter other than		Make use of the SHC8565
SHC8565 is used		transmitter provided. Some
		transmitters already built into other
		equipment may not be compatible
		with the SHC8565 headphone
		because of the advanced
		technologies used.