3Getting started
3.1Connect transmitter
1.Connect the video source to the transmitter
a. Take the supplied transmitter (A). Find the SCART cable that is connecting the video source to the TV1. Disconnect this SCART cable.
Note: the video source can be a satellite receiver, a VCR, a DVD player or recorder...
2. Connect TV1
Plug the SCART cable from TV1 into the SCART connector of the transmitter (A).
Transmitter |
3.Connect the power adapter
a.Take the supplied power
adapter (C) to plug the connector into the DC 9V power connector on the transmitter (A).
b.Plug the adapter into the power outlet.
Getting started
E n g l i s h
c. The green LED on the front panel should be on.
Note: if it is not the case, press the ON/OFF switch on the back of the product.
4. Check that TV1 is working well a. Switch on TV1
b. Check that TV1 is working well. c. Switch on the connected video
source.
d. Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
5. Connect the remote control blaster cord (D) to the IR socket.
Please reference to "3.4 Install the remote control blaster cord" to have more information.
EN 9 9
