Connect the power adapter
D
1.Take the supplied power adapter (D).
2.Plug the connector into the DC 9V power
connector on the transmitter(A).
3.Plug the adapter into the power outlet.
> The power light on the front comes on as red.
Preparation
A
1.Switch on the transmitter (A).
2.Switch on the video source.
3.Take these items:
• Receiver (B)
• Power adapter (D)
• Remote control of a video source.
• This quick start guide (E)
4.Go to TV2.
2Connect receiver
AC
3
2
1
1
Check the operation of TV1
E
1.Switch on TV1.
2.Switch on the connected video source.
3.Select the correct SCART input on TV1.
4.Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
Firmly insert the SCART connectors to the ports:
1.Plug the connector straight into the por t.
2.Apply some force when you insert the connector.