Connect TV2

AC

3
2
1
1
TV2
1
4 5
SLV3220 WIRELESS TVLINK RECEIVER
2

TV2

B
Connect the power adapter
C
Check the operation of TV2
D
1.Plug the SC ART cable of the receiver into
the SCART port of TV2.
1.Switch on TV2.
2.Switch on the receiver (B).
3.Select the correct SCART input on TV2.
4.Point the remote control of the video
source to the receiver (B).
5.Operate the video source with its remote
control.
6.Check if TV2 shows the image of the video
source.
> The receiver is connected correctly.
1.Take the supplied power adapter (D).
2.Plug the connector into the DC 9V power
connector on the receiver (B).
3.Plug the adapter into the poweroutlet.
> The power light on the front comes on as red.