ENGLISH 9
4Press the 'Ready' button after you have set the audio level and the installation manager will continue to install other components.
>The screen below appears when the installation was successful. You can now connect your PC Camera.
Note!
The SPC 900NC PC Camera is 'XP Plug & Play'.
This means if you are running Windows XP and you have installed Service Pack 2 and the latest Microsoft Windows XP updates you don't need to install the SPC 900NC PC Camera driver. Simply plug in the camera and you can start using your SPC 900NC PC Camera.
Connecting the camera to your PC
1Be sure to run the installation CD first, before connecting the camera to the PC.
2 Turn on the PC.
3 Connect the USB plug of the USB cable to a USB port of the PC.
>The camera will now derive its power from the PC.
4Use the clamp and the two rubber rims to attach the camera to your PC monitor or laptop screen or fold out the clamp and place the camera on your desk.
