Startup
1 Connect the power cord to the DC socket
of the PhotoFrame and then to a power
supply socket.
A few seconds later, the PhotoFrame »
turns on automatically.
2 Move the joystick up/down to select a
language, and then press OK .
3 Move the joystick up/down/right/left to set
time and date, and then press OK .
4 To start PhotoFrame, select
[Start PhotoFrame] and then press OK .
5 To start slideshow, select [Play] and then
press OK .
To pause slideshow, press • OK .
To resume slideshow, press
• OK again.
To turn off the PhotoFrame, press and
•
hold .