Philips SRC2063/27 manual Buttons and functions

During initial setup

1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function.

2 Press the button that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every button that does not function.

• If the button still does not function as expected, try pressing it again for a longer period of time.

After initial setup
1	Make sure the receiving device is able to
	respond. E.g. when you try to repair the Play
	button for your DVD player, make sure to
	insert a DVD into the DVD player otherwise
2	the Play button is not able to function.
	Select the device
	that you wish to
	operate (e.g. DVD).
	Press the		or
		device selection
	button to select
3	DVD.
	Keep buttons			5 sec.
	and	pressed
	simultaneously for
	5 seconds.
	•	The red Setup
		light lights
		up.The remote control is now in setup
4		mode.
	Press and hold the button that does not
	function and immediately release it when the
	device responds.
•	If the button still does not function as
	expected, try pressing it again for a longer
5	period of time.
	Press the		or
		selection button
	twice to save your
	settings and exit			2 x
	setup mode.
	•	When no
		button is pressed for 5 minutes or more,
		the remote control will exit setup mode,
8		automatically saving all your settings.
	EN

3Using the universal remote controls

3.1Buttons and functions

The illustrations on page 2 gives an overview of all buttons on the remote controls.Try out the buttons you need for operating your devices.

Notes

•Buttons having the same functions as the buttons on your original remote control may have different namings on the SRP2003 / SRP2006 (e.g. Info / Display).

•Only functions that are available on your original remote control can be used for operating your devices with the universal remote controls.

1	Setup light. Lights up
	when a remote control
	command is being sent,
	when you just selected
	a device and when the
	remote control is in setup
2	mode.
	selects available source
	inputs (antenna, cable,
3	etc.).
	device selection buttons.
	Select the device to be

operated. 4

GUIDE	electronic program guide.
MENU	menu on / off.
INFO	on-screen channel
EXIT	information.
	exits / clears on-screen
	menu displays.
3 4 1 2	cursor up, down, left, right
OK	in a menu.
	confirms your selection.
	EN	9

Using the universal remote controls English