Philips SRC2063/27 manual Resetting a button to its Original function

A, B, C, D	Context sensitive buttons,
	ordered following the
	requirements for cable
	boxes.
	A - Yellow, B - Blue, C - Red,
5	D - Green.
+ VOL -	adjusts TV volume.
.................................	mutes TV sound.
.................................	previous program / Last /
+ CH -	Back.
	next / previous channel.
6
5	rewind.
2	play.
6	fast forward.
9	stop.
0	record.
;	pause.
4P 3P	previous (4P) / next
	(3P) page / track in
	various modes.
/	set your Thumb ratings.
7	used after direct channel
	selection. some devices
	require ENTER to be
	pressed after channel
	selection.
...........................	selects between one
	and two-figure channel
8	numbers.
	digit buttons for direct
	channel / track selection.
9	switches the selected
	device on / off.

Note

For some TV brands / types, the button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again.

3.2		Resetting a button to its
		original function		English
If an improved button (see chapter 2.2.2) still
does not function as expected, you can always
reset the button to its original function.
1	In the current			control
	device mode, keep 5 sec.
	digit buttons			remote
	and	pressed
	simultaneously for 5
				universal
	seconds, until the
	red Setup light		lights up.
2	• The remote control is now in setup mode.			the
	Press digit buttons
				Using
	,	, and	, in
	that order.
	•	After each
		button press

the red Setup light blinks once.

3Press the button

that you wish to
reset twice. E.g. the
22 button.	2 x
• After each

button press the red Setup light blinks once.

• The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function.

10 EN EN 11