2Getting started
2.1Inserting the batteries
•Insert 2 AAA type
batteries, noting the + and - configuration in the battery compartment.
Note
When replacing the batteries, all user settings will be retained in the remote control memory for an unlimited period of time.
2.2Testing the universal remote control
It is advised to test whether your device(s) already respond(s) to the SRP4004 before setting it up (see chapter 2.3).The example below instructs you how to do this for your TV. You can repeat the same steps for other devices (DVD player/recorder, Cable/Satellite box and VCR) which you want to operate using the SRP4004.
Example: testing the universal remote control on your TV:
1 Switch ON your TV manually or use the original remote control for this. Tune to channel 1.
2 Press the 
device selection key
to select TV.
• The key lights
up.
• If the key does not
light up, check whether the batteries are properly inserted (see chapter 2.1).
4EN
04_27__Manual_80_210.indd 4 |
