4Press and hold the key that does not function and immediately release it when
the device responds.
• If the key still does not function as expected, try pressing it again for a longer period of time.
5 Press the 
device selection key |
| |
twice to save your |
| |
settings and exit | 2 x | |
setup mode. | ||
|
• When no key
is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.
3Using the universal remote control
Using the universal remote control English
3.1Keys and functions
The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices.
Notes
•Keys having the same functions as the keys on your original remote control may have different namings on the SRP4004 (e.g. Info / Display).
•Only functions that are available on your original remote control can be used for operating your devices with the SRP4004.
1 | Setup light. Lights up red |
|
| when the remote control | |
| is in setup mode. |
|
2 | selects available source |
|
| inputs (antenna, cable, |
|
| etc.). |
|
3 | device selection keys. |
|
| • select the device to be | |
| operated. |
|
| • light up when a remote | |
| control command is |
|
| being sent. |
|
| EN | 9 |
04_27__Manual_80_210.indd 9 |
