Philips SRP4004/27 manual Improving keys, Up.The remote control is now in setup mode

2.3.2Improving keys

When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some keys do not yet function as expected. In this case you can have the remote control search for alternatives.

Note

Improving keys is not possible when the code was found during full database search (with code ‘9, 9, 9, 9’).

During initial setup

1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play key for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play key is not able to function.

2 Press the key that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every key that does not function.

•If the key still does not function as expected, try pressing it again for a longer period of time.

After initial setup
1	Make sure the receiving device is able to
	respond.
	E.g. when you try to repair the Play key for
	your DVD player, make sure to insert a DVD
	into the DVD player otherwise the Play key
2	is not able to function.
	Select the device
	that you wish to
	operate (e.g. DVD).
	Press the	device
	selection key to
3	select DVD.
	Keep keys	and 5 sec.
	pressed
	simultaneously for
	5 seconds.
	• The red Setup
	light	lights

up.The remote control is now in setup mode.

8EN

04_27__Manual_80_210.indd 8 25-09-09