Sylvania 6727DG Clock SET UP, Manual Clock Setting, Automatic Clock Setting, Press SET-UP

TV/DTV SECTION

OPTIONAL SETTINGS

CLOCK SET UP

TV DTV VCR

Set the unit clock correctly for VCR timer recording. We suggest that you should set the clock manually when you first set up the unit, then set the auto clock setting to "ON" to correct the time periodically.

NOTES:

•If you cannot receive a station with time signals, auto clock setting is not available. Use manual setting only.

•You must use the remote control for the clock setting.

MANUAL CLOCK SETTING

In the example below, the clock is to be set to:

DATE:	May 5th, 2006
SETTING TIME:	5:40PM

1 Press [SET-UP].

Use [K / L] to select "SETTING CLOCK", then

AUTOMATIC CLOCK SETTING

NOTES:

•If a cable converter box is being used, make sure it is turned on.

•You must use the remote control for the clock setting.

•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to enable to set up or correct the clock automatically.

1Press [SET-UP].

Use [K / L] to select "SETTING CLOCK", then press [ENTER].

2 Press [ENTER] to select "ON".	– SETTING CLOCK –
	B AUTO CLOCK	[ON]
	AUTO CLOCK CH SEARCH
	AUTO CLOCK CH	[ 02]
	MANUAL CLOCK SET
	D.S.T.	[OFF]
	TIME ZONE [OFF]

press [ENTER].

2 Use [K / L] to select	– SETTING CLOCK –
"MANUAL CLOCK SET", then	AUTO CLOCK	[ON]
	AUTO CLOCK CH SEARCH
press [ENTER].	AUTO CLOCK CH	[ 02]
	B MANUAL CLOCK SET
	D.S.T.	[OFF]
• If there is no local PBS station	TIME ZONE [OFF]

in your area or on your cable

system, select "AUTO CLOCK" and press [ENTER] to turn "OFF" the function before this

3Press [L] to select

"AUTO CLOCK CH SEARCH". Then press [ENTER].

•The unit begins searching for the station which contains the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

– SETTING CLOCK –

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

	AUTO CLOCK CH		[ 02]
	MANUAL CLOCK SET
	D.S.T.		[OFF]
	TIME ZONE [OFF]
– AUTO CLOCK CH SEARCH –
08	10	13

– –

step.

3 Use [K / L] to set your	– MANUAL CLOCK SET –
desired month, day, year, hour	MONTH DAY			YEAR
	05	/	05 FRI	2006
and minute.
	HOUR		MINUTE
Use [s / B] to move to	05	:	40 PM

	another item.
4	Press [SET-UP].	5:40 PM

Although seconds are not displayed, they begin counting

from 0 when you press [SET-UP]. Use this feature to synchronize the clock with the correct time.

•When the search has finished,

"_ _" appears at the lower left of the screen.

NOTES:

•During "AUTO CLOCK CH SEARCH", the picture may be distorted.

•If no number appears on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on this page.

4Write down the numbers that appear on the screen. They are the auto clock stations in your area.

5Press [RETURN] to go back to "SETTING CLOCK" menu.

–SETTING CLOCK –

NOTE:

•When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

1Follow steps 1 to 2 above.

2Select the item you want to change using [B].

3Enter correct numbers using [K / L].

4Press [SET-UP]to start the clock.

Press [L] to select	AUTO CLOCK	[ON]
"AUTO CLOCK CH".	AUTO CLOCK CH SEARCH
	B AUTO CLOCK CH	[ 02]
	MANUAL CLOCK SET
Use [s / B] until you locate	D.S.T.	[OFF]
	TIME ZONE [OFF]

an auto clock station number.

6Press [SET-UP]to exit the menu.

NOTE:

•Once the unit is turned off, it will periodically check and set the correct date and time.

16

EN