Chapter 4 | BIOS Setup |
♦ Assign IRQ 10 – [Disabled] or [Enabled] | (Typically unused) |
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 11 – [Disabled] or [Enabled] (Typically ISA Bridge/Native IDE)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 12 – [Disabled] or [Enabled] (Typically PS/2 Mouse)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 14 – [Disabled] or [Enabled] (Typically Hard Disk)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 15 – [Disabled] or [Enabled] (Typically Hard Disk)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦Assign DMA 0 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 1 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 2 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
LittleBoard 550 | Reference Manual | 77 |
