Using AQUOS LINK

Controlling HDMI Equipment Using

AQUOS LINK (Continue)

AQUOS LINK Setup

Make the settings to use AQUOS LINK. Set the settings with "Setup" > "Advanced" > "AQUOS LINK Setup".

AQUOS LINK Control

Select AQUOS LINK Control to disable the AQUOS LINK function even when an AQUOS LINK-compatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly.

Auto Power On

If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

Channel Select Key

This function can be set for each input terminal.

The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of the connected AQUOS LINK-compatible equipment.

Audio Return Channel

This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.

Requirements for using an ARC-compatible AV amplifier:

ARC-compatible AV amplifier connected to the ARC- compatible HDMI IN terminal. EQ/LE650U/C6500U/LE642U series:HDMI IN 1 UQ/TQ/SQ/LE657U series:HDMI IN 3

(Refer to the operation manual of the ARC-compatible equipment for details.)

Use of an ARC-compatible cable.

Auto: You can listen to the TV audio with ARC-compatible audio equipment.

Off: This function does not work.

NOTE

If the TV audio cannot be output from the AV amplifier even after making the necessary settings, connect the TV to the AV amplifier with an optical fiber cable and select "Off".

ENG 7-2

Page 94
Image 94
Sharp LC60EQ10U manual Controlling Hdmi Equipment Using Aquos Link Continue, Aquos Link Setup