On-ScreenDisplay Menu

Example

Setup (Continue)

Input Settings

HDMI Setup - Auto View

Reactivating the temporarily released V-CHIP BLOCK You can reactivate the temporarily released V-CHIP BLOCK as shown below.

Select "Status" setting from the Parental Control menu to reactivate BLOCK.

Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental Control to reactivate BLOCK.

(See pages 4-16 to 4-18.) Switch off the TV power.

NOTE

Performing any of the three above will activate the V-

CHIP BLOCK.

Status

Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number.

Quick Start Mode

When this function is activated, you can reduce the TV's start-up time or even let the TV in standby mode start displaying images and so on via the connected equipment on the network.

NOTE

Setting "Quick Start Mode" to "On" consumes more power.

When you view images sent from external equipment in an HDMI connection, this function allows the image size on the TV to automatically switch to an appropriate one.

NOTE

Refer to your external equipment operation manual for the signal type.

When connecting a DVI-HDMI conversion adapter/cable to the HDMI IN terminal, the image may not come in clearly.

PC input

You can adjust the position of the image input from a PC the settings with "Setup" > "Advanced" > "PC input".

(See page 8-1.)

Custom Input Label

Lets you set the input terminal displayed when using the INPUT list or channel display. Press /// to select the new name for the input mode.

Using the software keyboard, you can enter up to 10 characters for text.

(See page 9-5.)

NOTE

You cannot change labels if the input source is TV, Home Network, USB, Screen Sharing or Bluetooth.

ENG 4-19

Page 47
Image 47
Sharp LC60EQ10U manual Input Settings, Status, Quick Start Mode, PC input, Custom Input Label