Sharp LC60EQ10U manual Monochrome, Black Level, Reset

On-ScreenDisplay Menu

Example

Picture Settings (Continue)

Lamp Swing Effect (for the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

Light Sensor Adjustment

The brightness level range of the Light Sensor's automatic adjustments can be set according to your preferences. The adjustment range of the Light Sensor can be set to a

Available only when AV MODE is set to "VINTAGE MOVIE" MODE. When this function is enabled, the lamp light looks like it is swinging. You can adjust the effect level between 0 and +3.

Monochrome

For viewing a video in monochrome.

Game Type (for the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

You can adjust picture quality according to the type of the game you are playing.

Standard: Optimizes picture quality for standard video games.

High Motion: Optimizes picture quality for high motion video games.

NOTE

"Game Type" is not available depending on the input signal type.

"Game Type" is only available when AV MODE is set to "GAME" and "Resolution Enhanced" is set to "OFF".

Black Level

Adjusts on-screen black level to your preferred level. High: The black level gets brighter.

Low: The black level gets darker.

NOTE

"Black Level" is available for input signal from Composite Video, Component 480i and analog broadcasts (air and cable).

maximum of +16 and a minimum of –16. Max.: –15 through +16

Min.: –16 through +15

NOTE

The "Light Sensor Adjustment" settings are active only when "Automatic Light Sensor" is set to "On".

The maximum setting cannot be set to a smaller number than the minimum setting.

The minimum setting cannot be set to a bigger number than the maximum setting.

Depending on the brightness of the surrounding light, the Light Sensor might not operate if the adjustment range is small.

Reset

Returns Picture Settings to their factory preset values. To reset, select "YES" and then press ENTER.

ENG 4-10