Sharp LC60EQ10U manual Smart TV Continue, Wallpaper

On-ScreenDisplay Menu

Example

Smart TV (Continue)

Wallpaper

When you display images by using the USB memory device:

Create a folder named "WP" in the root directory of the USB memory device (the first directory when the USB

Activating the function will display still images when the TV is in standby mode.

Wallpaper Mode

Configures Wallpaper Mode settings. Off:Nothing will be displayed.

Picture:Still images will be displayed when the TV is in standby mode.

Clock: The clock will be displayed when the TV is in standby mode.

Configure the clock settings. (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

(See page 4-24.)

NOTE

The clock mode can only be used when a network connection has been established.

Finish configuring the network settings.

After you set the time once, the clock will continue to operate even if you disconnect from the network. However, you cannot switch the daylight saving time setting when disconnected from the network.

Data Source

For the wallpaper, you can select either the still images pre- installed in the TV or your favorite still images stored in the USB memory device.

Pre-Installed:The images pre-installed in the TV will be displayed in a slideshow.

USB: Your favorite images stored for the wallpaper will appear.

If only a single still image is stored in the USB memory device, that image will be displayed as the wallpaper. When there are multiple still images in the memory, all the images will be displayed in a slideshow.

NOTE

Images are displayed in 3-minute intervals as a slideshow.

When the TV is in Wallpaper mode, you can turn off the TV by pressing and holding POWER on the TV for 5 seconds.

- Just before the TV turns off, the last image shown when the TV was turned off appears briefly.

- Your settings may not be saved in some cases.

memory device is opened), and store into the folder the still images you want to display for the wallpaper.

You must insert the USB memory device into the USB terminal before turning off the TV.

If there are images on the USB memory device but they do not appear on the screen, switch to USB mode and check whether the image files on the USB memory device are shown correctly.

Timer Setting

You can set the length of time the TV will remain in the Wallpaper Mode.

3 hours/6 hours/12 hours/24 hours

NOTE

No buttons except for POWER work even while the still images are being displayed.

If the ready-for-use USB memory device is not inserted, the still images pre-installed in the TV will be displayed in a slideshow even when "Data Source" is set to "USB".

Because the USB memory device cannot be detected immediately after the TV is turned on from standby mode, the wallpaper pre-installed in the TV may be displayed even when "Data Source" is set to "USB". The still images will be displayed until the set time has elapsed.

ENG 4-23