Watching TV

Initial Installation (Continue)

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

6 Press / to select "Antenna & Cable" or "Set-top box", and then press ENTER.

To watch TV via an antenna or cable connection (without using a set-top box):

Select "Antenna & Cable", and then go to step 7. To watch TV via a set-top box:

Select "Set-top box", and then press ENTER.

Check that the set-top box connected to the TV is on.

Press / to select the input to which the set-top box has been connected.

If your Set-top box is turned off, "Disconnected" might be shown.

To watch TV, select the input source corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press / to select "On", and then press ENTER.

When this is set to "On", the channel on the TV cannot be changed using the remote control unit or menu. (e.g. CH /, Favorite CH, etc.)

See page 4-20 for details on the Input Skip function.

Press INPUT to select the input source corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment.

See the operation manual of the connected equipment for setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

7Press /to select "Air" or "Cable". Press ENTER to enter the setting.

ENG 2-4

Page 9
Image 9
Sharp LC60EQ10U manual Antenna & Cable/STB, Air/Cable Antenna setting