Sharp LC60EQ10U manual Information Continue

On-ScreenDisplay Menu

Example

Information (Continue)

CAUTION

2 Press / on the Manual Update screen to select "USB Update", and then press ENTER.

3 Press ENTER to start checking the data in the USB memory device.

Do not remove the USB memory device or unplug the AC cord while the software is being updated.

Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail.

1 Insert the USB memory device with the update file into the USB 1 or USB 2 terminal on the TV.

When you update the software, use only one USB terminal. Either USB 1 or USB 2 is usable.

4 During the data checking, "Checking" blinks.

The current version of the TV software and the version of the update file on the USB memory device are displayed.

If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed.

Check the file on the USB memory device, and then reinsert the USB memory device correctly.

ENG 4-33