Sharp LC60EQ10U manual Troubleshooting 3D Images, Problem Possible solution

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)

Troubleshooting - 3D Images

Problem	Possible solution
3D images are not displayed.	Is “3D auto change” set to “Off”? Press 2D/3D to switch
	to 3D mode
	(Page 5-11).
	If “3D auto change” is set to “Mode1” or “Mode2” but no
	3D images are displayed, check the display format of the
	content being viewed. Some 3D image signals may not
	be recognized as 3D images automatically. Press 2D/3D
	to select the appropriate display format for the 3D image
	(Page 5-9).
	Is the power of the 3D glasses turned on? Press the
	power button for at least 2 seconds to turn on the 3D
	glasses.
	Are the 3D glasses set to 2D mode? Press the power
	button for an amount of time that is less than 2 seconds
	to switch the 3D glasses to 3D mode.
	Is there an obstacle between the 3D glasses and the TV,
	or is something covering the receiver on the 3D glasses?
	The 3D glasses operate by receiving a signal from the
	TV. Do not place anything between the 3D emitter on the
	TV and the receiver on the 3D glasses.
Images displayed in 3D mode	Is the power of the 3D glasses turned on? Press the
appear doubled while you are	power button for at least 2 seconds to turn on the 3D
wearing the 3D glasses.	glasses.

Images displayed in 3D mode appear 2D while you are wearing the 3D glasses.

Are the 3D glasses set to 2D mode? Press the power button while viewing 2D images, the LED light blinks in green and the 2D images switch to 3D images.

For further details, refer to the operation manual of the 3D glasses.

ENG 5-6