On-ScreenDisplay Menu

Example

Picture Settings (Continue)

Clear Picture Processing (for the UQ17U, TQ15U, SQ17U, SQ15U and SQ10U models)

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Mid-High:

Reduces jaggies and noise and displays a clear picture. Processes noise included in broadcast signals to improve picture quality.

High:Improves picture quality through Clear Picture Processing at a level above “Standard”.

Middle:Improves picture quality through Clear Picture Processing.

Off:No adjustment.

C.M.S.

(Color Management System)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue:This is a standard to adjust the color either more reddish or more bluish in tone.

C.M.S.-Saturation:Increases or decreases the saturation of a selected color.

C.M.S.-Value:A higher value makes the image brighter. A lower value makes the image darker.

NOTE

For resetting all adjustment items to the factory preset values, press / to select "Reset", and then press

ENTER.

Middle:

Mid-Low:

Low: White with reddish tone

Low (Xenon), Low (Carbon arc): Available only when AV MODE is set to "VINTAGE MOVIE" MODE. Use one of these items to make picture color become more reddish. White balance can be adjusted between a maximum of +30

and a minimum of –30 for each color temperature.

R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI) Fine tuning the color temperature

To fine tune the color temperature, set "10 Point Setting" to "On".

You can adjust the "Position" setting. Adjust the set color temperature from +1 to +10.

White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

NOTE

When "Position" is set to "10", you can adjust the white balance between –30 and 0.

For resetting all adjustment items to the factory preset values, press / to select "Reset", and then press

ENTER.

ENG 4-8

Page 36
Image 36
Sharp LC60EQ10U manual Mid-High, Color Management System, Middle Mid-Low