Sharp LC60EQ10U Control Item Command Parameter Control Contents Surround, Audio, Min, Analog

Using a PC

Control of the TV (Continue)

CONTROL ITEM		COMMAND					PARAMETER				CONTROL CONTENTS
SURROUND	A		C	S	U	*		_	_	_	For the UQ17U, TQ15U,
											SQ17U, SQ15U and
											LE657U models:
											0: (Toggle),
											1: Normal,
											2: Off,
											4: 3D Hall,
											5: 3D Movie,
											6: 3D Standard,
											7: 3D Stadium
											For the SQ10U, EQ10U,
											LE650U, C6500U and
											LE642U models:
											0: (Toggle),
											1: On,
											2: Off
AUDIO	A		C	H	A	x		_	_	_	(Toggle)
SELECTION
SLEEP TIMER	O		F	T	M	*		_	_	_	0: Off,
											1: OFF TIMER - 30
											MIN.,
											2: OFF TIMER - 60
											MIN.,
											3: OFF TIMER - 90
											MIN.,
											4: OFF TIMER - 120
											MIN.

CONTROL ITEM		COMMAND				PARAMETER				CONTROL CONTENTS
CHANNEL	DIRECT	D	C	C	H	*	*	*	_	The	An input change is included if it
	CHANNEL									channel	is not TV display.
	(ANALOG)									number of	In Air, 2-69ch is effective.
										TV	In Cable, 1-135ch is effective.
										(1-135)
	DIRECT	D	A	2	P	*	*	*	*	(0100-	DIGITAL Air (Two-Part
	CHANNEL									9999)	numbers, 2-digit plus 2-digit)
	(DIGITAL)
		D	C	2	U	*	*	*	_	(1-999)	DIGITAL Cable (Two-Part
											numbers, 3-digit plus 3-digit)
											Front half of DIGITAL CABLE
											CHANNEL NO. (Designate
											major channel)
		D	C	2	L	*	*	*	_	(0-999)	DIGITAL Cable (Two-Part
											numbers, 3-digit plus 3-digit)
											Rear half of DIGITAL CABLE
											CHANNEL NO. (Designate
											minor channel)

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

Any numerical value can replace the "x" on the table.

ENG 8-6