Sharp LC60EQ10U manual Direct Button Operation, Changing Channels, Method

Direct Button Operation

Changing Channels

You can change channels in several ways.

Method 1

Using CH/ on the remote control unit or on the TV.

Method 2

Using remote control buttons 0-9, • (DOT).

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5 ENTER

To select a 3-digit channel number (e. g., Channel 115):

Press 1 1 5 ENTER

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 2 • (DOT) 1 ENTER

Method 3

Selecting the program from the Channel list.

1 Press INPUT on the remote control unit.

The INPUT list displays.

2 Press / to select "AIR" or "CABLE".

The Channel list displays.

3 Press / to select the desired channel, and then press

ENTER.

NOTE

When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

When you enter 0-9only, channel selection will be made if there is no operation within a few seconds.

If you push "0" by itself, nothing will happen.

Complete the above steps within a few seconds.

When you enter 0-9and • (DOT), channel selection will be made if there is no operation within a few seconds.

ENG 3-1