Sharp LC60EQ10U Internet Setup, Internet Connection, Auto Setup, Manual Setup, Connection Type

Using the Internet

Internet Setup

Perform the procedure below to make adjustments or to confirm the settings for accessing the Internet.

1 Press MENU to display the MENU screen, and then press ENTER.

2 Press / to select "Smart TV", and then press ENTER. 3 Press / to select "Internet Setup", and then press

ENTER.

4 Press / to select "Internet Connection" or "Interactive Service", and then press ENTER.

Select "Internet Connection" when you make general adjustments to connect to the Internet.

If you want to make settings to restrict access to the Internet, then select "Interactive Service".

5 Press / to select a specific item, and then press

ENTER.

6 Press / (or /) to select the desired setting, and then press ENTER.

7 Press MENU to exit.

Internet Connection

You can connect your TV to the Internet using the setting item "Internet Connection".

Auto Setup

Adjustments for network connection will be made automatically. Select "Wired" or "Wireless" and follow the instructions displayed on the screen.

Automatic adjustments for wireless LAN connection can be made only for the WPS method.

If your access point uses any other method, perform "Manual Setup".

Select the desired connection method and follow the instructions shown on the display.

Manual Setup

You can make adjustments manually for network connection.

Connection Type

Select the connection type.

Wired: The signal is detected and setup is performed automatically. Use "IP Setup" to check and change the settings as necessary.

Wireless: Configure the access point settings on "Wireless Setup".

ENG 9-2