On-ScreenDisplay Menu

Example

Setup (Continue)

Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

ENERGY STAR qualification is based on AV MODE "STANDARD (ENERGY STAR)*1".

Antenna & Cable/STB: Select the type of connection you will use to watch TV.

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been completed.

Smart TV: When you connect to the Internet on the TV, confirm the connection method and make adjustments. Wireless LAN connection is possible only when the

WPS (push button) method is used. If any other method is used, make settings by Smart TV > Internet Setup > Internet Connection.

(See pages 9-2 to 9-4.)

Completed: The settings confirmation screen is displayed. Confirm the information displayed on the screen.

NOTE

TV Channel Setup

CH Setup

If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

CH Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH /.)

Off: Does not skip channels. (Channel selection enabled using CH/.)

Remove Scrambled CH: This function makes the TV look for and then delete digital cable channels that are scrambled and so unavailable in the set area. The process may take more than 20 minutes.

Yes: Starts to remove scrambled channels.

No: This function does not work.

NOTE

See Initial Installation on

*1: Except for LC-90LE657U

See Initial Installation on

pages 2-2 to 2-7 for setting each item.

If no channel is found, confirm the type of connection made with your TV and try "Easy Setup" again.

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

pages 2-2 to 2-7 for setting each item.

If no channel is found, confirm the type of connection made with your TV and try channel search again.

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

ENG 4-14

Page 42
Image 42
Sharp LC60EQ10U manual Setup Continue, TV Channel Setup, CH Setup