Sharp LC60EQ10U Connection using an Ethernet cable, Wireless LAN connection by the WPS method

Watching TV

Initial Installation (Continue)

Connection using an ETHERNET cable:

Select "Wired" and press ENTER.

Confirm that the TV is properly connected with the router, and then press "Next". Follow the instructions on the display to perform the connection test.

Wireless LAN connection by the WPS method:

Select "Wireless" and press ENTER.

Follow the instructions on the display, and finalize the connection after testing its viability.

NOTE

After you finish configuring the network settings, configure the "TV Name Setting", "Remote Control App",and "Samba TV" settings.

(See page 4-26, 8-3.)

The product that you have purchased may not be equipped with "Samba TV". In this case, this feature will be added by way of a planned future software version update.

When you change the network settings, refer to Smart TV > Internet Setup > Internet Connection.

(See pages 9-2 to 9-4.)

Completed

11 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press

ENTER.

Examples of the settings confirmation screen

When one or more channel is received after "Antenna

&Cable" was selected in step 6 and a search was carried out.

When no channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.

ENG 2-6