Chapter 4 | BIOS Setup |
BIOS Configuration Screen
Ampro Setup Utility for LittleBoard 550, SWxxxxxx
[Date & Time] |
|
> Date | 14 Jan 2005< |
Time | 10:24:34 |
[Drive Assignment] | 1.44 MB, 3.5” |
Drive A | |
Drive B | (none) |
Drive C | HDD/CF on Pri Master |
Drive D | (none) |
Drive E | (none) |
Drive F | (none) |
Drive G | (none) |
[Boot Order] | Drive A: |
Boot 1st | |
Boot 2nd | Drive C: |
Boot 3rd | CDROM |
Boot 4th | (none) |
Boot 5th | (none) |
Help for Date
The Date & Time fields are updated in
When you make a change, the CMOS is updated immediately.
Any changes made to Date & Time fields will be saved even if you discard changes at exit.
Use Arrow keys to change menu item, use Page Up/Down to modify. Esc to exit.
(C) Copyright 2005, Ampro Computers, Inc. - http://www.ampro.com
Figure 4-2. Modifying Setup Parameters Screen
•Date & Time
♦DATE (dd:mmm:yyyy) – This requires the
♦Time (hh:mm:ss) – This requires 24 hour Clock setting in hours, minutes, and seconds
Drive Configurations and Boot Options
Drive Assignment
♦Drive A – [none], [360kB, 5.25”], [1.2MB, 5.25”], [720kB, 3.5”], [1.44MB, 3.5”], [2.88MB, 3.5”], or [USB Floppy]
NOTE | If USB Boot Support is [Disabled], the USB Floppy selections are invalid |
| and Drive B must be set to [none]. See Table |
|
|
♦Drive B – [none], [360kB, 5.25”], [1.2MB, 5.25”], [720kB, 3.5”], [1.44MB, 3.5”], [2.88MB, 3.5”], or [USB Floppy]
NOTE | If an on board CompactFlash device is used in the system, it is always |
| configured as [HDD/CF Pri Master or Slave] on Drive C or D. |
♦Drive C – [none], [HDD/CF on Pri Master], [CDROM on Pri Master], [HDD/CF on Pri Slave], [CDROM on Pri Slave], [HDD on Sec Master], [CDROM on Sec Master], [HDD on Sec Slave], [CDROM on Sec Slave], [USB HDD], or [USB CDROM]
NOTE | The BIOS does not support a break in the drive order, that is, Drive C |
| can not be listed as [none] when the boot device is Drive D. |
|
|
66 | Reference Manual | LittleBoard 550 |
