VCR SECTION
RECORDING
AUTO RETURN
VCR
This function allows you to automatically search the beginning of the recorded program(s) after timer recording finishes.
1Press [SET-UP].
Use [K / L] to point to "USER’S SET UP", then press [ENTER].
2 Use [K / L] to point to | – USER'S SET UP – | |
"AUTO RETURN", then press | RENTAL | [OFF] |
REPEAT PLAY | [OFF] | |
B AUTO RETURN [ON]
[ENTER] to select "ON".
3When all the timer recordings are completed, the unit will rewind to the beginning of the recorded program(s) and then turn itself off.
NOTE:
•If you turn off the unit while rewinding the tape, the AUTO RETURN will stop.
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and press [ENTER] to select "OFF".
•Even if any power failure occurs, the unit will retain its memory for this feature.
AUTO REWIND-EJECT
VCR
• When the end of a tape is reached during record- |
ing, playback, or fast forward, the tape will auto- |
matically rewind to the beginning. After rewinding |
COPYING A VIDEO CASSETTE (from another source)
VCR
You can make copies of video tapes for your enjoyment.
You CANNOT copy a DVD to a videotape.
WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
Connect this unit and a source (for playing) device as shown the following diagram.
REC/OTR | REW | PLAY | F.FWD STOP/EJECT | HEADPHONE VIDEO |
| AUDIO |
|
[This unit] |
| L | R |
| |||
|
| Audio/Video |
|
| [Ex: Jacks of | ||
|
|
|
| source device] | |||
|
| cables |
|
| |||
|
|
|
| AUDIO | |||
|
| (not supplied) |
| ||||
|
|
|
| L | |||
|
|
|
|
|
| OUT | IN |
|
|
|
|
|
|
| R |
|
|
|
|
|
| VIDEO | |
|
|
|
|
|
| OUT | IN |
1 Insert a
2 Insert a video cassette to record into this unit’s cassette compartment.
3 Press [SPEED] to select the
finishes, the unit will eject the tape and turn itself |
off. |
desired recording speed (SP/SLP).
SP
• This function is operative when REPEAT PLAY is |
set to "OFF". |
• The tape will not |
ing or One Touch Recording (OTR). |
4 Press [SELECT] until "AUX" | AUX |
appears on the screen. |
|
5Press [REC/OTR] on the unit.
6Begin playback of the tape
in the source device.
NOTE:
•For best results during copying, use the control panel whenever possible. The remote control might affect the operation of the source device.
7 To stop copying, press [STOP/EJECT CA] on the unit, then stop the playback on the source device.
30
EN
