RECORDING

NOTES:

Insert a cassette tape with its erase-prevention tab in place.

This unit cannot record the contents from the built-in DVD.

You can ONLY watch the same TV program that is being recorded.

NORMAL RECORDING

VCR

1Use [CH. K / L] or the Number

buttons to select the channel to

CH 10

 

be recorded.

 

OTR (One Touch Recording)

VCR

This function enables you to start recording for specified length simply by pressing [REC/OTR] on the unit.

1Use [CH. K / L] or the Number buttons to select the channel to be recorded.

NOTE:

If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4. Select the channel to be recorded on the cable box or satellite box.

VCR SECTION

NOTE:

If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4. Select the channel to be recorded on the cable box or satellite box.

2Press [SPEED] to select the desired tape speed (SP/ SLP).

(Refer to "SELECTING TAPE

SP

 

SPEEDS" on page 24.)

3Press [REC] to start recording. REC

 

SP

 

 

4 Press [PAUSE F] to tempo-

PAUSE

rarily stop recording unwanted

 

scenes.

 

Press [PAUSE F] again or

 

[REC] to resume recording.

SP

NOTE:

If the recording is paused for more than 5 minutes, the unit will automatically switch to the recording mode to prevent tape from damage.

5Press [STOP C] to stop recording.

2Press [SPEED] to select the desired tape speed (SP/SLP).

(Refer to "SELECTING TAPE SPEEDS" on page 24.)

3 Press [REC/OTR] on the unit

OTR (2:30)

repeatedly until your desired

 

length appears on the screen.

 

The recording time will increase

 

by 30 minutes up to 8 hours.

SP

Recording starts immediately when you press [REC/OTR].

Time(s)

Display

 

Recording length

1 time

 

(normal recording)

2 times

0:30

 

30 minutes

3 times

1:00

 

60 minutes

 

 

 

 

 

17 times

8:00

 

480 minutes

NOTES:

If you press [REC/OTR] when "OTR (8:00)" is displayed, the unit returns to the normal recording mode.

Even if you press [POWER] during OTR, the unit continues recording.

You cannot start OTR with the remote control.

In the SLP mode, maximum recording time, assuming the tape starts at the beginning, is 8 hours using T-160 (or 6 hours using T-120).

If the tape runs out before the end time, the unit will switch to the stop mode immediately, eject the tape and turn itself off.

To show the remaining time of OTR, press [DISPLAY] on the remote control to display "OTR" on the TV screen. (It will show up momentarily then disappear.)

TO CANCEL OTR IN PROGRESS

Press [STOP/EJECT CA] on the unit or [STOP C].

SEARCH FUNCTION / RECORDING

27

EN

Page 27
Image 27
Sylvania 6727DG owner manual Normal Recording, To Cancel OTR in Progress, Search Function / Recording