SRU540_05_English_versie_6.qxd
Instructions for use
•If the device does not respond at all, or not to all of the
key commands, start again from step 2 and try the next code from the list.
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 | y Standby . . . . . . . . . switches TV,VCR, DVD or SAT on or off. |
2 | . . . . . - teletext on/off ( ); |
| - text off ( ); |
|
| - wide screen TV ( ); | |
|
| - subtitle ( | ); |
|
| - text hold ( | ). |
3 | MENU | turns the menu on and off. | |
4 | Cursor keys | cursor up, down, left, right in a menu. | |
5 | AV | switches between external inputs of your | |
|
| equipment. |
|
6 | s | mutes the sound of the TV. | |
7 | - VOL + | adjusts the TV volume. | |
8 | Digit keys | direct choice of channels and other functions. | |
9 | SHIFT | for extra functions. When pressed at the same | |
|
| time as a second key, the second key will get | |
|
| another function. All blue labelled keys can be | |
|
| used together with SHIFT. For example: | |
| SHIFT + INSTALL . installs your TV | ||
| SHIFT + STORE . . . | stores TV settings | |
Try out other combinations with the
Only functions featured on the original remote control are available.
0 5 | - red teletext key |
| - rewind (VCR/DVD) |
2 | - index |
| - play (VCR/DVD) |
6 | - blue teletext key |
| - wind (VCR/DVD) |
9 | - green teletext key |
| - stop (VCR/DVD) |
0 | record |
; | - yellow teletext key |
| - pause (VCR/DVD) |
! / | selects between one- and |
| numbers. |
@2 / SURROUND . . selects previous programme/channel. selects surround modes.
# - PROG + . . . . . . . . . . selects a previous or following channel. $ INFO . . . . . . . . . . . . . . turns menu info on and off.
% OK . . . . . . . . . . . . . . . . confirms your selection.
^ BACK . . . . . . . . . . . . . jumps back one level in the menu or turns off the menu.
& SELECT . . . . . . . . . . . selects TV, DVD, SAT or VCR mode.
If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.
If the device does not respond at all, or not to all of the key commands, follow the instructions under ‘Setting the remote control’. It is possible that you must enter another code for the device.
English
7
