SRU7140_10
| User Manual |
|
|
9 AV | - switches between external |
| (audio / video) inputs of your |
| equipment (TV, STB). |
| - picture setting options |
| (TV, STB) |
0 | sound setting options |
| (TV, STB) |
! | selects between one- and two- |
| figure channel numbers |
| (TV, STB). |
@ Number keys | for direct channel selection |
| (TV, STB, AMP). |
Source selection keys | select TV, DVD,VCR,TUNER, |
| CD, AUX or HDD (Hard Disk |
| Drive) mode (AMP). |
# LEARN | sets up learning functions. |
$ 0 | - record. Press twice to start |
| recording. For some brands, |
| press once, then press again |
| for three seconds. |
| - selects previous channel. |
% BACK | - jumps back one level in the |
| menu or turns off the menu |
| (TV, STB, DVD). |
| - turns Teletext off. |
^ SELECT | selects TV, DVD, STB or AMP |
| mode. |
& PROG(ram) | selects next / previous channel |
| (TV, STB). |
* FAV | selects next / previous favorite |
| station (TV, STB). |
| stops at the current Teletext |
| picture (TV, STB). |
| selects wide screen TV (TV, |
| STB). |
( C | clears entries (TV, STB, DVD) |
(Mute) | turns off the TV sound. |
Using the Shift key
The SHIFT key is used to access additional functions for the current device mode e.g. Menu, Exit, cursor, etc.
Not all codes have shifted functions.To access additional functions:
1Press SELECT to select the desired device mode (TV, DVD,
STB or AMP).
–The device mode indicator lights up in the selector window.
2 Press and release SHIFT.
–The device mode indicator remains lit to indicate shifted mode.
3Press other keys to find out which functions are available for the selected device mode.
Only functions featured on the original remote control are available.
4Press and release SHIFT to switch back to normal mode.
–If no key is pressed in shift mode, the remote control returns to normal
English
5
