Philips SRU 7140 user manual Clearing all learned functions for a device mode

SRU7140_10 03-07-2007 09:53 Pagina 9

User Manual

30mm English

1Place both remote controls on a flat surface (like a coffee table) and aim them head-to-head with about 30 mm in between.You may need to adjust the height of one of the remote controls to achieve this.

2Press SELECT to select the desired device mode (TV, DVD, STB or AMP).

–The device mode indicator lights up in the selector window.

3 Press and hold SETUP until the device mode indicator blinks and then remains lit, then release the key.

4 Press LEARN.

–The device mode indicator blinks once, then remains lit.

5Press the key you wish to learn a new function to (target key).

E.g. (Standby).

For additional (shifted) functions, first press SHIFT, then press the function key. See ‘Using the SHIFT key’.

6Press and hold the key you wish to copy on the original remote control (learn key, e.g. POWER) until the device mode indicator blinks once and then remains lit.

–If there is a learning problem, the indicator blinks for 3 seconds and then remains lit.

If this happens, repeat steps 5 to 6.

7Repeat steps 5 to 6 for other functions from the selected device you wish to learn to this remote control.

8Press and release SETUP when all desired functions are learned. Code learning is now complete.

9Repeat above steps for other devices you wish your remote control to learn from.

Clearing all learned functions for a device mode

1Press SELECT to select the device mode (TV, DVD, STB or AMP) of which you wish to clear all learned functions.

–The device mode indicator lights up in the selector window.

2 Press and hold SETUP until the device mode indicator blinks and then remains lit, then release the key.

3 Press and release LEARN twice.

–The device mode indicator blinks.

4Press and release digit key 1.

–The device mode indicator turns off and all learned functions for this mode are now cleared from the remote control memory.

9