Playing | Philips SV2000 specs

SVZ142.comb 4/7/99 6:30 PM Page 23

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

Playing 23

1Turn on the TV.

2Insert a tape.

2

Insert a tape in the VCR. The POWER and CST.IN lights will appear. If the tape’s record tab has been removed, the VCR/TV light will appear and playback will begin automatically.

3

If playback does not start automatically, press the VCR/TV button to put the VCR in VCR position (the VCR/TV light will appear). Then, press the PLAY button.

4

Press the STOP button to stop playback.

5

Press the REWIND button to rewind the tape.

6

When the tape has finished rewinding, press the EJECT button to remove the tape.

		POWER		VCR/TV	EJECT	6
		1	2	3		6
		4	5	6
		7	8	9	CHANNEL
		SPEED	0	+100
		SLOW	QUICK-	SEARCH
			QUICK-	TIME	INDEX
			FIND	TIME	INDEX	3
			FIND
		MENU	DISPLAY	EXIT	COUNTER
	5			RESET	MEMORY
	5	REWIND	/ PLAY		F.FWD
		REWIND	/ PLAY		F.FWD
		RECORD		/ STOP	PAUSE/STILL
	4

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (Press the VCR/TV button so that the VCR/TV light appears.) Then, press the PLAY but- ton.

•Other playback options and fea- tures are on pages 34 - 41.

Image 23

Philips SV2000 owner manual Playing, Read and follow the steps below to play a tape

Contents

Video Cassette Recorder For Customer Use Warranty Verification Introduction FeaturesSafety Precautions Table of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote Control Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System Hookups Without a Cable Box/Direct Broadcast System cont’d Watching TV With the VCR Off Timer RecordingsHookups With a Cable Box Recording and Viewing a Scrambled or Unscrambled Channel Playing a Tape Hookups With a Cable Box cont’dRecording One Channel/Watching Another Hookups With a Stereo TV 2Turn on the TV Turning on Your VCR Automatic Channel Setup Select ADD/DELETE CH. Then, press the F.FWD button Automatic Channel Setup cont’dAdding/Deleting Channels Follow the steps below to set your VCR’s clock. Make sure Setting the Clock Setting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exit Press the Display OFF mode Press the Display button once Count modePress the Display button once Clock mode On-Screen Status Displays Remote Control Buttons Index Search Button Counter RESET/EXIT ButtonEject Button Time Search Button VCR Display Panel Front Panel Video in Jack AC Power CordRear Panel Video OUT Jack Read and follow the steps below to play a tape Playing 1Turn on the TV Insert a tape Recording Stopping an OTR One-Touch RecordingStarting an OTR Program Number Once Daily →WEEKLY Timer Recording Repeat the procedure in to set the recording’s end time Timer Recording cont’d Press the Counter RESET/EXIT button Timer recording. Details are on page eight Correcting a Timer Recording Cancelling a Timer Recording Auto Return Auto Satellite Link Using a Satellite Tuner Put the VCR in VCR position. The VCR/TV light will appear Press the VCR/TV button on the VCR remote control toRecording One Channel/Watching Another To return to the channel being recorded, use the TV Jack Rerecording Tape Duplication Repeat Play Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLP To on or OFF Rental PlayMenu will disappear, and Rental on or Rental Press the Play button to watch the tape Real-Time Counter Memory Index Search Time Search is not available during recording Time Search To resume normal tape playback, press the Play button Quick Find Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or Glossary Specifications Video Cassette Recorder Limited Warranty Index Supplied Accessories