Automatic Channel Setup cont’d | Philips SVA104 specs

Automatic Channel Setup (cont’d) 13

Adding/Deleting Channels

The channels you no longer receive or seldom watch can be deleted from the memory. You also may add new channels into the memory. Make sure:

●The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

1

Press the MENU button repeatedly until the INITIALIZE menu appears.

2

Press the PLAY button or the STOP button repeatedly to select CHANNEL SET UP. Then, press the F.FWD but- ton.

CHANNEL SET UP

→AUTO TUNING ADD/DELETE CH

3

Press the PLAY button or the STOP button repeatedly to select ADD/DELETE CH. Then, press the F.FWD button.

ADD / DELETE CH

0 2 (TV)

4

Press the Number buttons or press the PLAY button or the STOP button repeatedly until your desired channel number appears.

1

5

4

POWERVCR/TV EJECT

1	2	3
4	5	6
7	8	9	CHANNEL
SPEED	0	+100
SLOW	QUICK-	SEARCH		6
SLOW	FIND	TIME	INDEX
	FIND
MENU	DISPLAY	EXIT	COUNTER
		RESET	MEMORY
REWIND	/ PLAY		F.FWD	5
RECORD		/ STOP	PAUSE/STILL	5

2-3

5

Press the F.FWD button or the REWIND button so that ADD or DELETE flashes on-screen.

6

While your choice is flashing, press the COUNTER RESET/EXIT button. The channel you added or deleted will appear. The channel will be added or deleted, whichever was flashing on-screen when you exited the menu.

Image 13

Philips SVA104 owner manual Automatic Channel Setup cont’d, Adding/Deleting Channels

Contents

Video Cassette Recorder For Customer Use Warranty Verification Safety Precautions FeaturesIntroduction Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenance Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast System Plug in the TV and the VCR CH3 CH4 Recording/Viewing Any Channel Connections Recording One Channel/Watching Another SignalCable Box/DBS Cable Hookups With a Stereo TV 2Turn on the TV Turning on Your VCR Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Follow the steps below to set your VCR’s clock. Make sure Setting the Clock 96-7 Setting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exit Press the Display button once Clock mode OFF mode Press the Display button once Count modeOn-Screen Status Displays Remote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search Button VCR Display Panel Front Panel Rear Panel AC Power CordVideo OUT Jack Video in Jack Read and follow the steps below to play a tape Playing 1Turn on the TV Insert a tape Recording Starting an OTR One-Touch RecordingStopping an OTR Program Number → Once Daily Weekly Timer Recording Repeat the procedure in to set the recording’s end time Timer Recording cont’d 4Press the Counter RESET/EXIT button to exit Correcting a Timer Recording Cancelling a Timer Recording Auto Return Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appear Antenna Rerecording Tape Duplication Repeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Menu will disappear, and Rental on or Rental Rental PlayTo on or OFF Press the Play button to watch the tape Real-Time Counter Memory Index Search Time Search is not available during recording Time Search To resume normal tape playback, press the Play button Quick Find Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or Glossary Specifications Video Cassette Recorder Limited Warranty Index Supplied Accessories