Recording One Channel/Watching Another | Philips SVA104 specification

32 Recording One Channel/Watching Another

1

Press the RECORD button to start a recording of the cur- rent channel. Details are on page 24.

2

Press the VCR/TV button to put the VCR in TV position. The VCR/TV light will disappear.

3

4

Select the channel you want to watch at the TV.

Set the TV to channel 3 or 4.

3		POWER		VCR/TV	EJECT
Use the TV remote control to select the channel you
want to watch at the TV.		1	2	3
want to watch at the TV.
4		4	5	6
4		7	8	9	CHANNEL
		7	8	9	CHANNEL
To return to the channel being recorded, use the TV		SPEED	0	+100
remote control to select channel 3 or 4, whichever chan-		SPEED	0	+100
remote control to select channel 3 or 4, whichever chan-
nel the CH3/CH4 switch on the back of the VCR is set to.		SLOW	QUICK-	SEARCH
nel the CH3/CH4 switch on the back of the VCR is set to.			QUICK-	TIME	INDEX
			FIND	TIME	INDEX
5		MENU	DISPLAY	EXIT	COUNTER
				RESET	MEMORY
	1	REWIND	/ PLAY		F.FWD
Press the VCR/TV button on the VCR remote control to		RECORD		/ STOP	PAUSE/STILL
put the VCR in VCR position. The VCR/TV light will appear.		RECORD		/ STOP	PAUSE/STILL
put the VCR in VCR position. The VCR/TV light will appear.
The channel being recorded will appear on-screen.

6

To stop recording, press the STOP button.

2

5

6

Helpful Hint

•If you use a Cable Box/DBS, you may not be able to watch one chan- nel while recording another. Details are on pages eight - nine.

Image 32

Philips SVA104 owner manual Recording One Channel/Watching Another, To return to the channel being recorded, use the TV

Contents

Video Cassette Recorder Warranty Verification For Customer Use Introduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenance Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV CH3 CH4 Plug in the TV and the VCR Connections Recording/Viewing Any Channel Signal Recording One Channel/Watching AnotherCable Box/DBS Cable Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Automatic Channel Setup cont’d Adding/Deleting Channels Setting the Clock Follow the steps below to set your VCR’s clock. Make sure Setting the Clock cont’d 96-7 Press the Counter RESET/EXIT button to exit Language Selection On-Screen Status Displays OFF mode Press the Display button once Count modePress the Display button once Clock mode Remote Control Buttons Counter RESET/EXIT Button Eject ButtonTime Search Button Index Search Button VCR Display Panel Front Panel AC Power Cord Rear PanelVideo OUT Jack Video in Jack Playing Read and follow the steps below to play a tape Recording 1Turn on the TV Insert a tape Stopping an OTR One-Touch RecordingStarting an OTR Timer Recording Program Number → Once Daily Weekly Timer Recording cont’d Repeat the procedure in to set the recording’s end time 4Press the Counter RESET/EXIT button to exit Cancelling a Timer Recording Correcting a Timer Recording Auto Return Auto Satellite Link Using a Satellite Tuner Press the VCR/TV button on the VCR remote control to Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appear Rerecording Tape Duplication Antenna Repeat Play Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still Picture To on or OFF Rental PlayMenu will disappear, and Rental on or Rental Real-Time Counter Memory Press the Play button to watch the tape Index Search Time Search Time Search is not available during recording Quick Find To resume normal tape playback, press the Play button Automatic Playback Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel Channel 3 or Specifications Limited Warranty Video Cassette Recorder Index Supplied Accessories