6Mount your receiver

You can either mount the receiver on the wall or on the back of the HDTV.

Mount your receiver on the wall

1 Select a spot near the HDTV.

2 Drill two holes in the wall. Make sure that the distance between the two holes is

1 25/32” (45 mm) and the diameter of the hole is 3/16” (5 mm).

3 Punch the supplied two anchors into the two holes on the wall.

4 Put the two screws into the anchors and leave 1/8” (3 mm) to mount the receiver on.

5 Hook the key holes at the back of the receiver on the screws.

English

EN 13

Page 13
Image 13
Philips SWW1810 user manual Mount your receiver on the wall, Select a spot near the Hdtv