4Getting started

4.1 Connect the antenna

1Insert the aerial plug firmly into the aerial socket x at the bottom of the TV.

HDMI ANTENNA

4.2 Connect the mains

1Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket.

Warning

Verify that the mains supply voltage corresponds to the voltage printed on the sticker at the rear of the TV.

4.3 Remote control

1Insert the 2 batteries supplied.

Be sure the (+) and (-) ends of the batteries line up correctly (markings are printed in the case)

For most keys pressing a key once will activate the function. Pressing a second time will undo the action.

4.4 Switch on the TV

1Press the power switch B at the side of the TV.

An indicator on the front of the TV lights up and the screen comes on.

2If the TV is in standby mode, press the -P+ keys or the B key on the remote control.

4.5 First time installation

The installation procedure consists of a series of screens that will guide you through the installation of your TV.

Follow the instructions on the screen.

Note

If the TV has already been installed before and/ or you want to change the First time installation settings, proceed with Use of the 'TV menu settings', p. 14.

ENGLISH

7

Page 7
Image 7
Philips SX60 user manual Getting started