15Issues referring to connected peripherals with a HDMI connector

Note

Teletext will not be available via equipment connected to a HDMI connector.

The HDMI IN connector allows the following TV and monitor display modes:

HD Standard Definition TV (SDTV) 640x480i 720x480i 720x576i

Enhanced Definition TV (EDTV) 640x480p 720x480p 720x576p

High Definition TV (HDTV) 1920x1080i 1280x720p

PC VGA 640x480

SVGA 800x600

XGA 1024x768

If necessary, you can adjust the picture position to the centre of the screen with the o or œ, p or π keys.

Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the hdmi input, the Digital audio output signal is muted.

Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source peripheral equipment to prevent unauthorised copies from being made.

Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length to max. 5 m.

Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.

In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then on again.

To get an optimal viewing, it is advised to switch your DVD player, Blu-Ray of HD settop box to the highest possible supported display modes.

52

Page 52
Image 52
Philips SX60 user manual