Philips T800 To Charge / Recharge, Optimize the working life of the battery, Corded Trimming

Models: T800

1 18
Download 18 pages 7.61 Kb
Page 5
Image 5
4.ENGLISH

4.ENGLISH

TO CHARGE / RECHARGE

(Re)charging requires 10 hours.

Use only the cord provided.

Battery performance is best if you recharge only when the battery is (almost) completely empty.

Charging or recharging at temperatures below 40°F or higher than 95°F adversely affects lifetime of battery.

Continuously recharging or continuously using as a corded Trimmer will reduce life of battery.

You may also trim using the cord provided. This Trimmer will not recharge while being used corded.

C 1 Be certain Trimmer is OFF.

C 2

Connect cord to Trimmer. Plug into any

 

100V to 240V AC outlet. Use only the

 

cord provided.

An adaptor plug may be necessary for cord

usage in some foreign countries. Your new

Trimmer will automatically convert internally

to work on 100V to 240V AC systems.

Do not charge Trimmer in a pouch.

ENGLISH 5.

C 3 Green Charging Indicator Light will go on to indicate Trimmer is charging. It will take 10 hours to fully charge the battery.

4Disconnect the cord and unplug from electrical outlet.

Optimize the working life of the battery

After Trimmer has been charged for the first time, do not recharge Trimmer between trimming sessions. Continue using it until the battery is completely empty.

Discharge the battery completely twice a year by letting the motor run until it stops.

Do not charge for more than 24 hours.

Do not keep cord permanently plugged in.

If Trimmer hasn’t been used for a long period of time,Trimmer must be recharged for

10 hours.

CORDED TRIMMING

1Connect cord provided to Trimmer.

2Plug Trimmer into electrical outlet.

3If battery is completely empty, wait one minute before switching Trimmer on.

4Slide ON/OFF switch ON and begin trimming.

Page 5
Image 5
Philips T800 manual To Charge / Recharge, Optimize the working life of the battery, Corded Trimming, English