Philips T800 manual Replacing The Cutting Unit, Assistance, Battery Removal, English

12.ENGLISH

C 4	Clean the cutting unit and the inside of the
	Trimmer with the brush supplied.
C 5	Close the cutting unit by pushing it back
	into place on the Trimmer until you hear a
	click.

REPLACING THE CUTTING UNIT

If your cutters become damaged or worn,

do not continue using the Trimmer. Replace cutters immediately.

1Open the cutting unit.

C 2	Remove the old cutting unit by pulling it
	upwards.
C 3	Place the two notches of the new cutting
	unit into the guiding slots.
4	Push the cutting unit back onto the
	Trimmer until you hear a click.

ENGLISH 13.

ASSISTANCE

For assistance or the Authorized Norelco Service Location nearest you, call toll free:

1-800-243-3050

or visit our website: www.norelco.com

Authorized Norelco Service Location information is available 24 hours a day, 7 days a week.

BATTERY REMOVAL

◗This Norelco Trimmer contains rechargeable Nickel-Cadmium batteries, which must be disposed of properly.

◗Batteries should only be removed when Trimmer is to be discarded.

◗Refer to Battery Removal instruction sheet for directions on removing the rechargeable batteries.