ON
VOL. BAR
EXIT
SETUP
BRIGHTNESS
PICTURE
COLOR
OFF
VOLUME
STATUS/EXIT CH
CH
POWER
VOL
VOL MENU
A/CH
MUTE
CC SLEEP
123
456
789
0
1
2
3
VOL. LIMIT
STATUS/EXIT CH
CH
POWER
VOL
VOL MENU
A/CH
MUTE
CC SLEEP
123
456
789
0
1
2
3
1
ON-SCREEN MENU CONTROLS (CONTINUED)
Use the Volume Bar con-
trol to see the TV’s vol-
ume level settings on the TV
screen. Once set the Volume
Bar will be seen each time
the VOLUME buttons (on the
TV or remote) are pressed.
VOLUME BAR
Press the MENU (M)
button on the remote, then
press the CH (+) or (–) (or
press the MENU ▲or ▼ but-
tons on the TV) to select the
word VOL. BAR with the
TV’s on-screen Arrow.
Press the VOL(+) or (-)
buttons to turn the VOLBAR
control ON or OFF. Try it out.
Press the VOL(+)
or (–) buttons. The
VOLUME BAR
should appear at the
bottom of the
screen.
NOTE: The TV's
volume level can
also be lowered
when the set is
turned OFF.
SMART
HELP
Press STATUS buttonto
clear the screen.
VOLUME
BEGIN
You can limit the maximum
volume level of the TV
set. Once the Volume Limiter
control is set the TVsound
cannot be played louder than
the maximum preset level.
LIMITING THE VOLUME
Press numbers 0, 7, 2,
0, 9, 1; then press MENU (M)
button on the remote or TV.
The VOL. LIMITbar will
show on the screen.
Press the VOLUME (+)
or (–) button until the VOL.
LIMIT bar is at the level you
want to be the highest possible
volume.
Remember,
the Volume Limit
Bar will appear to
return to the low end
of the register (when
the STATUS button
is pressed to set the
desired maximum
volume level - step #
3). This is normal for
setting the Volume
Limiter. Your new
maximum volume
level has been kept
in memory.
SMART
HELP
Press the STATUS but-
ton to set the maximum vol-
ume level. The screen will
clear and the TVwill return to
normal channel viewing.
BEGIN
12
ON
STEREO
CABLE
CHANNEL
SLEEP
CAPTION
VOL. BAR
STEREO
OFF
STATUS/EXIT CH
CH
POWER
VOL
VOL MENU
A/CH
MUTE
CC SLEEP
123
456
789
0
1
3
2
Your TVcan receive
broadcast stereo TVpro-
grams. The TV has both an
amplifier and twin speakers
through which the stereo
sound can be heard.
STEREO TV SOUND
Press the MENU (M)
button on the remote, then the
CHANNEL▲or ▼ buttons (or
the MENU ▲ or ▼ buttons on
the TV) to select the word
STEREO with the TV’s on-
screen Arrow.
Press the VOLUME (+)
or (–) buttons to turn the
STEREO mode ON or off. Remember,
if the TVis
set to STEREO but
the current channel
is not broadcasted
in stereo, the sound
at the TVwill
remain monaural.
SMART
HELP
Press the STATUS but-
ton on the remote control to
clear the screen.
STEREO
BEGIN
NOTE:The TV’s on-screen “STEREO”
indicator appears whenever the TVdetects an
incoming stereo signal. Be sure the TV’s
STEREO control is also turned “ON” in order
for the stereo sound to be heard through the
TV’s twin speaker system.
NOTE: Not all features (and
drawings) discussed in this
manual will necessarily
match those found with
your television set. This is
normal and does not require
you contacting your dealer
or requesting service.
5 - IB7759 E001