STATUS/EXIT CH
CH
POWER
VOL
VOL MENU
A/CH
MUTE
CC SLEEP
123
456
789
0
YES
CABLE
CHANNEL
SLEEP
CAPTION
VOL. BAR
EXIT
2
3
NO
1
NOTE: If you went
through First Time Setup
(page 3), this task has already
been completed for you.
You need to make sure that
the TV is set to pick up either
Cable TV stations or Antenna
signals. In other words, the
TV needs to know whether
you have connected a Cable
TV signal or a normal anten-
na to its ANTENNAplug (see
page 2).
CABLE OR ANTENNA INPUT
Press the MENU (M)
button on the remote, then the
CH (+) or (–) buttons (or press
the MENU ▲or ▼ on the TV)
to select the word CABLE
with the TV’s on-screen Arrow.
Press the VOL(+) or (-)
buttons (on the TVor the
remote) to select either:
YES- If you DO have Cable
TV connected to the
TV. Channels 1-125
can be selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
BEGIN
Try it out.
Press the CHANNEL
(+) or (–) buttons and
scan the channels. CH
(+), (–) works only
after STATUS button
is pressed to clear the
screen (or Menu times
out - about 1 minute.)
Remember, to set the
TV to select the chan-
nels on your Cable
system, or in your
area, see the "Auto
Programming" steps in
the SETUPsection on
page 3, and “Adding
Channels ” in the sec-
tion below.
SMART
HELP
ON-SCREEN MENU CONTROLS (CONTINUED)
Press STATUS button on
the remote control to clear the
screen.
12
SAVED
CHANNEL
SLEEP
CAPTION
VOL. BAR
EXIT
SETUP
DELETED
STATUS/EXIT CH
CH
POWER
VOL
VOL MENU
A/CH
MUTE
CC SLEEP
123
456
789
0
2
3
4
1
Auto Programming (see
page 3) adds all the
channels it can find (on your
Antenna or Cable TV system)
into the TV's memory.
Save/Delete channels makes
it easy for you to add other
channels, or drop unwanted
channels, from the list of
channels in the TV's memory.
ADD/DELETE CHANNELS
Press the MENU (M)
button on the remote, then the
CH (+) or (–) buttons (or the
MENU ▲or ▼ on the TV) to
select the word CHANNEL
with the TV’s on-screen Arrow.
Press Channel Number
buttons on the remote (or CH
▲or ▼buttons on the TV) to
select the channel you want to
SAVE (or DELETE.)
BEGIN
Press the VOL(+) button
to SAVE the selectedchannel
number into memory.
Press VOL(-) button to
DELETE a channel from
memory.
Press the STATUS button
to clear the screen after adding
(or deleting) all the channels
you want.
CABLE
CHANNEL
To SAVE a channel above 100, use the CH
▲▼ buttons on the TV. The remote number
buttons only go up to channel 99.
SMART HELP
4 - IB7759 E001