AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
|
| ENGLISH | |
Automatic TV channel search | |||
|
| ||
(Autoinstall) |
|
| |
|
|
|
During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the video recorder, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones.
1Switch on the TV set. If required, select the programme number for the video recorder.
2Press the MENU button on the remote control. The main menu will appear.
3 | Select line 'AUTO INSTALL' using P | or P | . |
4Press OK .
5'Autoinstall' starts. Wait until all TV channels have been found. This can take several minutes.
6When Autoinstall is complete, 'STORED' will briefly appear on the TV screen.
Date and time have been set and saved.
7To end, press MENU .
You can read about how to search for a TV channel manually in the section 'Manual TV channel search'.
Monitor function
You can switch back and forth between the TV picture and video recorder picture with MONITOR . But this only works when you use a scart cable to connect the video recorder to your TV set and your TV set responds to this
You can also use MONITOR on the video recorder.
Installing your video recording | 17 |
|
