Philips VCR VR 170/07 manual Programming a recording with Turbo Timer

Programming a recording with 'TURBO TIMER'

ENGLISH

With this function, programming a recording that takes place within the next 24 hours, will be quick and easy. The following pre-set information will appear in the display when you programme a recording using 'TURBO TIMER'.

Programme number = the programme number currently selected (TV channel) Start time = current time

End time = current time +2 hours

1	Press	TURBO TIMER on the remote control.
BBC1	The current set programme number will appear in the display, for
	instance, 'PROG. 01'. If required, you can change this using						P	or
	P	.
	'CLK' will flash in the video recorder display
	This display means that the video recorder clock is not set correctly. Please
	read the section 'Setting the time and date' in chapter 'Installing your video
	recorder'
2
	Press	TURBO TIMER .
20:00	The current time (= start time) will appear in the display, for instance,
	'START		20:00'. If required,	you	can change this using		P	or
	P	.
3	Press	TURBO TIMER .				'END 22:00'.
22:00	The end		time will appear in	the	display, for instance,
	'END 22:00'. If required, you can change this using P					or	P	.

4Press TURBO TIMER .

'OK' will briefly appear in the video recorder display. Programming is now complete.

5Insert a cassette with an intact security tab (unprotected).

6	Switch off with STANDBY/ON .
	The programmed recording will only function when the video
	recorder is switched off with STANDBY/ON .
	If any of the TIMER blocks are in use, ' ' will light up on the video
	recorder display.

Programming a recording (TIMER) 37