Philips VL1405 manual Functional overview Product illustrations on inside flap

6ENGLISH

Functional overview -

Product illustrations on inside flap

A)Transmitter unit SBC VL1400 (not supplied)

1Power button

switches the transmitter between stand-by and on.

2Power light

lights red in stand-by mode, green when power is on, flashes when receiving remote control commands

3COPY SOURCE button

links SCART input 1,2,3 or SCART OUT to SCART in/output 4.

4Copy source indication lights

indicate which SCART input (1,2 or 3) is linked to SCART in/output 4. When there is no light indication the SCART OUT is linked to SCART in/output 4.

5VIEW SOURCE button

selects which SCART input (1-4) is viewed on the transmitter SCART output

6View source indication display

indicates the SCART input number that is viewed on the transmitter output.

7AUTO light

indicates if automatic SCART switching is enabled (on) or disabled (off).

8Infra-red remote control blaster lights

transmit infra-red remote control signals from the receiver to the video source devices below.

9Transmission channel switch

switches the frequency channel of the audio/video signal to minimize interference.

10SCART input (1-4) connectors

for connection to SCART-enabled video source devices

11SCART output connector for connection to the main TV

12RCA sound output connector for connection to an audio amplifier

13DC power input

for connection to the mains

14Remote control blaster cord connector

15Remote control blaster cord

four infra-red lights used instead of the infra-red remote control blaster lights (A-8) for a more precise control of the video sources.

16SCART cable

17Power adapter

18Remote control antenna