![](/images/new-backgrounds/1285811/28581111x1.webp)
4. Installing your video recorder
Preparation for use
This chapter shows you how to prepare the video recorder use. The video recorder automati- cally seeks out and stores all available TV chan- nels.
'Aim' correctly
In the following sections, you require the remote control for the first time. When using, always aim the front of the remote control at the video recorder and not at the TV.
Connecting additional devices
After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them.
1.Press P+ .
The automatic channel search starts.
PLEASE WAIT
STARTFINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
The video recorder does not find any TV channels during the search
*Select channel 1 on the TV. Can you see the saved TV channel on the TV?
If not, check the cable connection of the aerial (aerial socket), video recorder, TV.
*The video recorder searches the entire fre- quency range in order to find and save the largest possible number of TV channels.
2.'TIME' and 'DATE' will appear on the TV screen.
TIME
DATE
END=EXIT
3.Check 'TIME'. If required, please change the
time with the number buttons 0..9 .
4.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
5.When all information is correct, save by
pressing STATUS/EXIT .
The preparation for use is now complete.
Manual TV channel search
In some cases it can occur that all of the TV channels are not found and saved during the first installation. In this case, the missing or coded TV channels must be searched for and stored man- ually.
1.Switch on the TV set. If required, select the programme number for the video recorder.
MENU .
The main menu will appear.
to select 'TUNER SET UP'. Then press B 1 .
to select 'MANUAL TUNING'. Then press B 1 .
5.Select 'PROG.' with
B 1 .
MANUAL TUNING
→PROG.P55
CHANNEL 055
SKIP[OFF]
SELECT K L CHOOSE B
END=EXIT
or
, select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press B 1 .
What is a special channel?
TV channels are transmitted in certain pre- defined frequency ranges. These ranges are divided into channels.
A specific frequency/channel is assigned to each TV station.
Certain frequency ranges are specified as spe- cial channels (hyperband channels).
7.Select 'CHANNEL' with K B L C , and con- firm with B 1 . Then enter the desired chan- nel with 0..9 .
If you set 'SKIP' on for a channel, this channel will be ignored when going through the channels with P+ or
I don't know the channels for my TV stations In this case, press K B L C in 'CHANNEL' to start the automatic channel search. A changing channel number will appear on the TV screen.
Continue the automatic search until you have found the desired TV channel.
6 | EN |
|